Friday, December 15, 2017

#1 2001-02-28 05:09:30 am

Bill Cheeseman
Administrator
Registered: 2006-06-30
Posts: 158

AppleScript 1.3.7 (Mac OS 8.6)

FIXED BUGS

According to Technote 1163, the bugs of interest to scripters listed below have been fixed. Additional bug fixes of interest to programmers are also listed in the Technote.

A memory leak while compiling scripts has been fixed.
Folder actions can no longer be attached to invisible folders.
The add - reject added items script has been fixed to prevent an infinite loop when attaching it to a folder.
The move - align open sub-folders script now works on pop-up windows.
A memory leak in unit conversions has been fixed.
The 'miles' unit type coercion now works.
Miscellaneous small memory leaks and intermittent crashes have been fixed.
The Apple Remote Access password can now be scripted correctly in the Network Setup Extension, allowing fully-automatic PPP connections. The 'Find by content' speakable item now talks to Sherlock instead of Find.

Offline

 

#2 2001-02-28 05:11:57 am

Bill Cheeseman
Administrator
Registered: 2006-06-30
Posts: 158

Re: AppleScript 1.3.7 (Mac OS 8.6)

NEW BUGS IN MAC OS 8.6
There is a feature, not really a bug, in the Mac OS 8.6 update installer which nevertheless bit a few AppleScripters very badly. In Mac OS 8.5, the trademark symbol was removed from the name of the AppleScript folder in the Apple Extras folder, for good and sufficient reasons. However, some people apparently kept the folder with the trademark symbol and used it to store their AppleScript work product. Along came the Mac OS 8.6 update installer and helpfully deleted obsolete folders and all their contents including any folder named AppleScript with a trailing trademark symbol. I sure hope they kept backups!

The Desktop Printer Manager has a distressing tendency to run out of memory. Mac OS 8.6: Out of Memory running an AppleScript (#31064 7/27/99, updated 7/30/99) explains how to use ResEdit to fix it.

In July 1999, Andy Bachorski of Apple indicated that the Network Scripting Extension does not properly implement the 'begin/end transaction' commands. The implementation is not very good in the Network Scripting case. There should not have been an end transaction event explicitly added to the terminology, nor should there be a begin transaction in the terminology. In the case of Network Scripting you don't need to use 'with transaction' -- it serves no purpose as the transaction ID attribute is ignored.

Offline

 

#3 2001-02-28 05:02:51 am

Bill Cheeseman
Administrator
Registered: 2006-06-30
Posts: 158

Re: AppleScript 1.3.7 (Mac OS 8.6)

DOCUMENTATION FOR NEW APPLESCRIPT FEATURES

The following sources of information about AppleScript 1.3.7 are available, many of them as part of the standard Mac OS 8.6 installation:

The Apple Help files in the Mac OS Help and AppleScript Help subfolders of the Help folder in the System Folder have been updated for AppleScript 1.3.7.

About AppleScript 1.3.6, the readme file provided with the Script Editor in the AppleScript subfolder of the Apple Extras folder after installing Mac OS 8.6, was apparently completed before the last-minute change to AppleScript that is now called 1.3.7. The About document includes information about AppleScript features that were introduced in AppleScript 1.3.2 and 1.3.4, as well as 1.3.7.

AppleScript CD-ROM Extras describes many of the new sample scripts and a couple of scriptable third-party utilities installed by Mac OS 8.6.

Open Transport 2.0.3 Read Me makes brief mention of the ability to script all aspects of Mac connectivity using Network Setup Scripting (NSS).

About Plaintalk 1.5.4, which is installed if you elect to install speech recognition, mentions that new scripts are installed in the Speakable Items folder.

Apple Technote 1163 on Mac OS 8.6 contains developer-oriented information about AppleScript 1.3.7.

The AppleScript Language Guide: English Dialect was updated to incorporate changes through and including Mac OS 1.3.7.

Offline

 

#4 2001-02-28 05:05:16 am

Bill Cheeseman
Administrator
Registered: 2006-06-30
Posts: 158

Re: AppleScript 1.3.7 (Mac OS 8.6)

TESTING WHETHER APPLESCRIPT 1.3.7 IS INSTALLED
Before using new features of AppleScript, careful writers of scripts intended for public distribution will want to determine which version of AppleScript is present on the user's machine. How to do this is explained in the article on AppleScript 1.3.4. The number to test for to determine whether AppleScript 1.3.7 is installed is this:

[code]AS 1.3.7 = 17826103 (01100137)[/code]

Offline

 

#5 2001-02-28 05:07:31 am

Bill Cheeseman
Administrator
Registered: 2006-06-30
Posts: 158

Re: AppleScript 1.3.7 (Mac OS 8.6)

APPLESCRIPT-RELATED SYSTEM SOFTWARE COMPONENTS

The Scriptable Finder
I understand that many long-standing bugs in the scriptable Finder, including some remaining from at least Mac OS 8.1, were not touched in Mac OS 8.6. Through an intermediary, I provided the following list of the eleven most-important Finder bugs to Apple in June 1999. They are ranked in order of importance as I see it, with the most serious first.

1. Comparisons of numeric values in filter references produce erratic results.

Chris Espinosa confirmed most of this in December 1998 and said he was filing a bug on it. Numeric comparisons in filter references generally produce unpredictable results, for example, using 'size', 'physical size', 'capacity', 'free space', 'modification date' and 'creation date'. Here are some tests I ran: For example, 'tell application Finder to get every disk where (XXX of it < YYY)' returns a list of references to fewer than the total number of qualifying disks on my system, where XXX is either 'capacity', 'free space', 'size' or 'physical size' and YYY is set to a number larger than the largest corresponding property among the disks on my system. (Incidentally, telling the Finder to 'tell startup disk to get (capacity = free space + size) --or + physical size' returns true.) I find that the problem also affects other finder items than disks, such as files, and that the correctness of the result depends on the magnitude of the number being compared against. For example, in a particular test I ran on two clipping files in a test folder, where both files have a 'size' of less than 500 bytes, 'every item of folder Test folder where size of it < 5000.0' returns an empty list, whereas 'every item of folder Test folder where size of it < 500.0' returns a list of references to both files. In fact, of course, both tests should generate a list of references to both files. And, reversing the test to '>' (greater than), each test produced the opposite result (for example, testing for 'size' and 'physical size' > 5000.0 reported that both files qualified, when in fact neither qualified. The problem also affects comparisons of Finder items using 'modification date' and 'creation date'. All of these errors make management of disks, such as backup scripts, using filter references impossible, and it has generated a lot of unhappiness on the lists. The workaround is to use slow repeat loops. [This bug has existed since at least Mac OS 8.1. I thought I had heard it was fixed in 8.5, but it apparently was not, or perhaps the fix backfired.]

2. 'Duplicate' in place returns empty list.

Eric Hellman reported, and Sal Saghoian, Andy Bachorski and Chris Espinosa of Apple have all confirmed, the widespread reports that duplicating one or more items in place (i.e., to the same folder) returns an empty list in Mac OS 8.5. I have confirmed, and Chris Espinosa has acknowledged, that this bug remains in Mac OS 8.6. Duplicating one or more items to another folder returns a reference to a single item, or a list of references to multiple items, as it should. An interesting cure is available, which may help track down the bug: Buy the commercial product Speed Doubler 8 from Connectix, turn on the Faster File Copying option under the Status tab, and check the Intercept Finder Apple Events option under the Copy tab. The 'duplicate' command now returns the correct result every time. Another workaround, suggested by Apple, is to duplicate items to another folder then move them to the desired destination with appropriate attention to potential name conficts. The 'move' command will return the desired result (but you have to know the destination anyway in order to use this workaround, so your script already has the desired information).

3. 'Where XXX of it' works but 'whose XXX' doesn't when getting attributes of Finder items using the filter reference form.

A statement like 'tell application Finder to get every item of desktop whose class is alias file' or 'to get (every item whose class is alias file) of desktop' returns an empty list even though there are alias files on the desktop. Changing it to the form 'tell application Finder to get every item of desktop where class of it is alias file' does work. The bug bites whether you are looking on the desktop or within a folder window. I have tested the following cases and found the bug in all of them: testing for kind alias, compiled script and folder, and class alias file, document file and folder. I assume the bug is a general problem with the implementation of the filter reference form. The workaround is always to use the 'where xxx of it' form instead of the 'whose' form.

4. 'Size' and 'physical size' properties of items return wrong class.

Select a file, then run 'tell application Finder to get size of selection' --or 'physical size of selection'. The result will appear to be of type 'real' because it has a decimal, such as '3679.0'. However, run 'tell application Finder to get class of (size of selection)' and it will return 'integer', as the dictionary says it should. Because of this discrepancy, you cannot coerce 'size of selection' or 'physical size of selection' to a string so as to display it or use it in a string. I wonder if the class of the returned value was changed to real to accommodate very large disks, but somebody forgot to fix the value returned by 'class' (and the corresponding description of the 'size' and 'physical size' properties of several classes). The workaround is always to work with the 'result' of the 'size' and 'physical size' properties, such as by assigning it to a variable. For example, the class of 'mySize' after running 'set mySize to size of selection' is 'real', and you can coerce it to a string. [This bug has existed since at least Mac OS 8.1.] [RadarWeb #2246150; I couldn't get the engineer to understand my bug report, possibly because I was confusing the 'size' and 'physical size' properties with the 'data size' command in the Standard Suite.]

5. Incorrect path to items on desktop of non-startup disk.

If you have more than one disk drive connected, drag an item from the non-startup disk onto the desktop and leave it selected. The statement 'tell application Finder to get selection as text' will return a path indicating that the selected item resides on the startup disk, when in fact it does not. The statement 'tell application Finder to get (selection as alias) as text' returns the correct path. This appears to be a coercion error, because the Finder returns a reference to the correct disk when you run the statement 'tell application Finder to get disk of selection'. It may not involve the Finder at all, since if you tell the Finder to get the selection, then coerce the result to text outside of the Finder tell block, you get the wrong result.

6. 'Creator type' and 'file type' when used with 'every' return raw event codes.

When used with 'every', 'creator type' and 'file type' return a list of raw event codes instead of the specified list of four-character strings. For example, 'creator type of every process' and 'file type of every item in selection' return a list of raw event codes in the form <<class XXXX>>, whether or not the filter reference form is used. This is inconsistent with the result of getting an indexed item, such as 'file type of first process', which returns a four-character string whether or not using the filter reference form. [This bug has existed since at least Mac OS 8.1.] [RadarWeb #2231601]

7. 'First item in window' returns arbitrary results.

The statement 'tell application Finder to reveal first item in front window' selects a different item in the window every time it is run. I don't know whether it should select the first item based on the current sorting column or instead based on a specific column (such as Name) no matter which column is currently in effect (I prefer the former, since the sorting order is scriptable and this would give greater control), but I do think it should select the same item every time it is run. [This bug has existed since at least Mac OS 8.1.] There is an interesting side effect: The order in which files in a window are listed by a statement like 'files of front window' changes each time you run it, at least if you preface it with a 'reveal first item' command. The result is now identical even if you change which column is currently being used to sort the window's display within the script, whereas I believe in Mac OS 8.1 it returned a different list ordering depending on which column was used to sort the display. [RadarWeb #2246142]

8. Can't test whether view of window is 'icon'.

The statement 'tell application Finder to get view of front window' returns the constant 'icon' if it is set to large icon view. However, you can't test a window's view for 'icon'. The statement 'tell application Finder to get (view of front window is icon)' generates an error message saying can't get icon. Testing for the other view constants in this manner (e.g., 'small' for small icon, 'name' for list by name) works fine. Is there a name conflict between the 'icon' constant and the 'icon' property of an item?

9. 'Titled' property of class window compiles to 'resizable'.

The statement 'tell application Finder to get titled of front window' compiles to 'tell application Finder to get resizable of front window'. Thus, it is now impossible to determine whether a Finder window has a title bar. (Are there any Finder windows that don't have a title bar? -- yes, Page Setup and Print Window, but they are modal and I'm not sure they belong to the Finder.)

10. 'Copy' doesn't record correctly.

Copying the name of a file, either by selecting the item or selecting its name in the Finder and selecting Copy from the Edit menu or pressing command-c, is recorded in the form of a raw event, <<event aevtcopy>>. The script as recorded will not run. If you manually edit the raw event by changing it to 'copy', it will run properly and put the name of the selected item onto the clipboard. [This bug has existed since at least Mac OS 8.1.]

11. 'Exists' doesn't work with 'original item' when applied to orphaned alias files.

The statement 'exists (original item of selection)' generates error number -1708 if an orphaned alias file is selected. It should return 'false'. The error message says the original item doesn't understand the 'exists' message, suggesting that a nonexistent object can't signal that it isn't there. Other statements incorporating this command don't generate an error at all but return incorrect results. For example, 'tell application Finder to get every item in desktop where (((original item of it) exists) is false)' returns a list of everything on the desktop, including an orphaned alias file if it is present on the desktop. [This bug has existed since at least Mac OS 8.1.]

Here are some more Finder bugs:

12. 'Move' without destination moves item to desktop.

The 'move' command moves an item from a folder to the desktop if no destination is specified. This could be considered a feature, not a bug, but I haven't seen it documented anywhere.

13. Errors and omissions in dictionary descriptions.

There are a few errors and omissions in descriptions of items in the Finder's dictionary ('aete' resource). For example, class desktop-object should list the 'disk' element as accessible 'by ID' as well as by numeric index and by name; after all, 'tell application Finder to get id of startup disk' does return an ID. There are a few other elements and properties in various classes whose descriptions are inaccurate.

14. Different commands return different names for the desktop.

Getting 'name of desktop' returns Desktop. This is what we call the desktop in conversation, but it is not consistent with what is returned when you get the name of any other container, namely, its full name without a trailing colon. The name that is normally used in the Finder is 'Desktop Folder', just as it is in the 'name' property of the 'info for' command in the Standard Additions scripting addition. As a result of this discrepancy, 'name of desktop' cannot be used in Finder scripts, as the name of a disk or folder can, by simply appending a colon. Coercing 'desktop' to a string correctly returns <startup disk>: Desktop Folder:, not only with the trailing colon but including the word Folder. You can extract the name from this string using standard (if somewhat awkward) string parsing methods. It would be easier if 'name of desktop' correctly returned Desktop Folder. [This bug has existed since at least Mac OS 8.1.]

URL Access Scripting application

In May 1999, TidBITS carried a lengthy article on URL Access Scripting. An Apple technical publication, Transferring Files With the URL Access Manager, describes the API for the URL Access Manager and discusses related programming topics, including downloading data from multiple URLs and using the URL Access Manager with AppleScript. The AppleScript information is minimal, however just a suggestion to set the timeout to a very high value. 10/13/99

Offline

 

#6 2001-02-28 04:59:03 am

Bill Cheeseman
Administrator
Registered: 2006-06-30
Posts: 158

Re: AppleScript 1.3.7 (Mac OS 8.6)


AppleScript 1.3.7, included in the free Mac OS 8.6 update in April 1999, is an incremental and bug-fix release of AppleScript, following on AppleScript 1.3.4, which was released on December 7, 1998 with Mac OS 8.5.1.

Like the notes on AppleScript 1.3.4 and AppleScript 1.1.2, this note is based on information obtained from various sources, including official Apple publications and the AppleScript mailing lists.

Offline

 

#7 2001-02-28 05:01:45 am

Bill Cheeseman
Administrator
Registered: 2006-06-30
Posts: 158

Re: AppleScript 1.3.7 (Mac OS 8.6)

NEW FEATURES IN APPLESCRIPT 1.3.7
AppleScript 1.3.7 contains both bug fixes and a few new features. These new features are notable:

Constants can now be converted to strings. For years, newcomers to AppleScript have stumbled over the fact that 'month of (current date)' couldn't be used to generate a word, like September, to build a date string. Now it can, simply by using the standard coercion syntax: 'month of (current date) as string'. This new coercion facility is quite general. For example, 'class of (current date) as string' returns the word date, which you can use to generate reports or error messages. Enumeration constants can also be coerced to strings.

AppleScript now uses Navigation Services, giving all of your scripts that let the user access files and folders a modern Mac OS appearance. The standard commands to navigate through files and folders, 'choose file', 'choose folder' and 'new file', now open Navigation Services dialogs.

The new unit types introduced with AppleScript 1.3 now include 'quarts' and degrees 'Kelvin'.

Error notifications in folder actions now have a 60-second timeout.

Aliases to script files can now be attached to folders.

Folder actions now work with locked script files.

A new native scripting additions mechanism has been introduced.

The 'choose files' command now shows invisible files if no type is specified.

AppleScript does a better job of finding applications targeted in 'tell' blocks.

The 'set volume' command uses newer sound control routines in the Mac OS.

The 'mount volume' command supports URLs more robustly, including optional user name and password parameters.

The 'display dialog' command shows full class names when a class is passed to it, not the 4-character code.

Sherlock's scriptability has been enhanced with two new commands.

Java applications running under MRJ and applets running in Apple Applet Runner are now fully scriptable if the developer includes an 'aete' resource. See Introduction to MRJ Scripting With AppleScript for Java (TechNote 1162 4/19/99), explaining how to implement AppleScript in Java applets.

The CD Extras folder on the Mac OS 8.6 CD-ROM includes another third-party utility, the iDo Scripts Scheduler from Sophisticated Circuits, Inc., which can be used to launch applications at predetermined times. This is apparently a preliminary version and it has generated numerous complaints that it does not function correctly. Newer versions are available online.

Offline

 

Board footer

Powered by FluxBB

RSS (new topics) RSS (active topics)